Planet WGSW-28040 - IGMP Snooping Last Member Query Interval; IGMP Snooping VLAN; IGMP Snooping Querier

User’s Manual of WGSW-28040 / 28040P
237
IGMP Snooping Last Member Query Interval
Description:
Set IGMP snooping last member query interval
Syntax:
igmp-snooping last-member-query-interval <time_sec>
Parameters:
time_sec : Valid range is 1-25 Sec. Default is 1 Sec.
Example:
To set IGMP snooping last member query interval:
WGSW-28040(config)# igmp-snooping last-member-query-interval 20
IGMP Snooping VLAN
Description:
Set IGMP snooping VLAN configuration
Syntax:
igmp-snooping vlan <vid>
Parameters:
vid : vid.
Example:
To set IGMP snooping VLAN:
WGSW-28040(config)# igmp-snooping vlan 1
IGMP Snooping Querier
Description:
Set IGMP snooping querier
Syntax:
igmp-snooping querier
Example:
To set IGMP snooping querier:
WGSW-28040(config)# igmp-snooping querier