Planet WGSW-28040 - MSTI Port Priority; SVLAN Command; Tpid; Port

User’s Manual of WGSW-28040 / 28040P
258
MSTI Port Priority
Description:
Sets the priority for specified instance
Syntax:
spanning-tree mst <msti> port <port_list> priority <priority>
Parameters:
Msti : Instance ID (0~15)
Port_list : Port list or 'all'
priority : priority (0~240)
Example:
To sets the path cost for specified instance:
WGSW-28040(config)# spanning-tree mst 1 port 1 priority 1
6.3.26 SVLAN Command
TPID
Description:
Sets the TPID
Syntax:
svlan tpid <id>
Parameters:
ID :Tag-protocol-id (0x0000 ~ 0xFFFF)
Example:
To set the TPID:
WGSW-28040(config)# svlan tpid 0000
Port
Description:
Sets the SVLAN port
Syntax:
svlan port <port_list> <pvid|service-port> [<vid>]
Parameters:
Port_list : Port list or 'all'
pvid : Pvid