User’s Manual of WGSW-28040 / 28040P
31
3. SWITCH MANAGEMENT
This chapter explains the methods that you can use to configure management access to the Managed Switch. It describes the
types of management applications and the communication and management protocols that deliver data between your
management device (workstation or personal computer) and the system. It also contains information about port connection
options.
This chapter covers the following topics:
îš„ Requirements
îš„ Management Access Overview
îš„ Administration Console Access
îš„ Web Management Access
îš„ SNMP Access
îš„ Standards, Protocols, and Related Reading
3.1 Requirements
îš„ Workstations of subscribers running Windows 98/ME, NT4.0, 2000/XP, MAC OS9 or later, Linux, UNIX or other
platform compatible with TCP/IP protocols.
îš„ Workstation installed with Ethernet NIC (Network Interface Card)
îš„ Serial Port connect (Terminal)
• Above PC with COM Port (DB9 / RS-232) or USB-to-RS-232 converter
îš„ Ethernet Port connect
• Network cables - Use standard network (UTP) cables with RJ45 connectors.
îš„ Above Workstation installed with WEB Browser and JAVA runtime environment Plug-in
It is recommended to use Internet Explore 7.0 or above to access Managed Switch.
To Next Page
Loading...
Need help?
General