Planet WGSW-28040 - Show Dot1 X; Show IGMP Snooping; Show MAC Address Table

User’s Manual of WGSW-28040 / 28040P
212
Show Dot1x
Description:
Show dot1x information
Syntax:
Show dot1x [<port>] [port_list]
Parameters:
port :port configuration
port_list : Port list or 'all'
Example:
Show Dot1x:
WGSW-28040(config)# show dot1x
802.1x protocol: Disabled
802.1x reauthentication: Enabled
802.1x reauthentication period(sec.): 3600
WGSW-28040(config)#
Show IGMP Snooping
Description:
Show IGMP snooping configuration
Syntax:
Show igmp-snooping <router|table|groups|vlan|querier>
Parameters:
router : show multicast routers
table : show multicast table
groups : show IGMP groups
vlan : show VLAN configuration
querier : show Querier information
Example:
Show IGMP snooping router:
WGSW-28040(config)# show igmp-snooping router
VID | Port | Expiry Time (Sec)
-----------+-----------+--------------------------------
WGSW-28040(config)#
Show MAC Address Table
Description: