Planet WGSW-28040 - Port Command

User’s Manual of WGSW-28040 / 28040P
242
Set mirroring source configuration
Syntax:
Mirror source port <port_list> <both|rx|tx>
Parameters:
port_list : Port list or 'all'
both : tx & rx
tx : tx only
rx : rx only
Example:
To set mirroring source configuration:
WGSW-28040(config)# mirror source port 1 both
Mirror Destination
Description:
Set mirroring destination configuration
Syntax:
Mirror destination port <port_list>
Parameters:
port_list : Port list or 'all'
Example:
To set mirroring destination configuration:
WGSW-28040(config)# mirror destination port 2
6.3.18 Port Command
Port State
Description:
Set port forwarding state
Syntax:
port <port_list> <enable|disable>
Parameters:
port_list : Port list or 'all'
enable : enable port forwarding
disable : disable port forwarding
Example:
To set port forwarding state: