Planet WGSW-28040 - Reboot Command

User’s Manual of WGSW-28040 / 28040P
265
WGSW-28040(config)# copy startup-config tftp 192.168.0.21 config test
Copy Firmware
Description:
Copy the run time firmware image
Syntax:
copy firmware tftp <A.B.C.D> <remote_file>
Parameters:
A.B.C.D : IP default gateway format is A.B.C.D where (A/B/C/D = 0 ~ 254)
Remote_file : Remote file name on TFTP server
Example:
To copy the run time firmware image:
WGSW-28040(config)# copy firmware tftp 192.168.0.21 config
Copy Authentication Key
Description:
Copy the SSH Authenticate Private key
Syntax:
copy <rsa1|rsa2|dsa2|ssl_cert> tftp <A.B.C.D> <remote_file>
Parameters:
A.B.C.D : IP default gateway format is A.B.C.D where (A/B/C/D = 0 ~ 254)
Remote_file : Remote file name on TFTP server
Example:
To copy the SSH Authenticate Private key:
WGSW-28040(config)# copy rsa1 tftp 192.168.0.21 key
6.3.34 Reboot Command
Reboot
Description:
Reboot the switch
Syntax:
reboot