Planet WGSW-28040 - Page 44

User’s Manual of WGSW-28040 / 28040P
44
The page includes the following fields:
Object Description
• Mode
Indicates the IP address mode operation. Possible modes are:
Static: Enable NTP mode operation. When enable NTP mode operation, the
agent forward and to transfer NTP messages between the clients and the server
when they are not on the same subnet domain.
DHCP: Enable DHCP client mode operation.
Enable the DHCP client by checking this box. If DHCP fails and the configured IP
address is zero, DHCP will retry. If DHCP fails and the configured IP address is
non-zero, DHCP will stop and the configured IP settings will be used. The DHCP
client will announce the configured System Name as hostname to provide DNS
lookup.
• IP Address
Provide the IP address of this switch in dotted decimal notation.
• Subnet Mask
Provide the subnet mask of this switch dotted decimal notation.
• Gateway
Provide the IP address of the router in dotted decimal notation.
Buttons
: Click to apply changes.
Figure 4-2-4 IP Information page screenshot
The page includes the following fields:
Object Description
• DHCP State
Display the current DHCP state.
• IP Address
Display the current IP address.
• Subnet Mask
Display the current subnet mask.
• Gateway
Display the current gateway.