Planet WGSW-28040 - Page 78

User’s Manual of WGSW-28040 / 28040P
78
• Rate (Kbit/sec)
Configure the rate for the port policer. The default value is "unlimited". Valid
values are in the range 0 to 1048544.
Figure 4-3-18 Port Rate Status page screenshot
The page includes the following fields:
Object Description
• Port
The switch port number of the logical port.
• Ingress Rate (Kbit/sec)
Display the current ingress rate.
• Egress Rate (Kbit/sec)
Display the current egress rate.