Chapter 5-Deploying a Polycom RMX™ Serial Gateway S4GW
Polycom, Inc. 5-11
11 Modify the following fields:
12 Click OK.
A Reset Confirmation dialog box is displayed
13 Click Yes.
14 After the RMX has restarted, log in.
15 Modify the Video Quality tabs of all conference Profiles, by changing the Content Video
Definition - Content Protocol setting of all conferences to H.263.
Table 5-1 Network Service - V35 tab
Field Description
V35 Gateway IP
Address
Enter the Management IP address of the management interface of
the Serial Gateway.
Username Enter the User Name that the RMX uses to log in to the
management interface of the Serial Gateway.
Password Enter the Password that the RMX uses to log in to management
interface of the Serial Gateway.
To Next Page
Loading...
