Polycom 1500 - Page 42

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments
1-36 Polycom, Inc.
14 Define the following parameters:
15 Click Next.
The Span Definition dialog box opens.
Table 1-10 Fast Configuration Wizard – PRI Settings
Field Description
Default Num Type Select the Default Num Type from the list.
The Num Type defines how the system handles the dialing digits. For
example, if you type eight dialing digits, the Num Type defines whether
this number is national or international.
If the PRI lines are connected to the RMX via a network switch, the
selection of the Num Type is used to route the call to a specific PRI line.
If you want the network to interpret the dialing digits for routing the call,
select Unknown.
Default: Unknown
Note: For E1 spans, this parameter is set by the system.
Num Plan Select the type of signaling (Number Plan) from the list according to
information given by the service provider.
Default: ISDN
Note: For E1 spans, this parameter is set by the system.
Net Specific Select the appropriate service program if one is used by your service
provider (carrier).
Some service providers may have several service programs that can be
used.
Default: None
Dial-out Prefix Enter the prefix that the PBX requires to dial out. Leave this field blank if
a dial-out prefix is not required.
The field can contain be empty (blank) or a numeric value between 0 and
9999.
Default: Blank