Chapter 1-First Time Installation and Configuration
Polycom, Inc. 1-41
28 Click Save & Close.
The RMX confirms successful configuration.
29 In the Success Message box, click OK.
30 In the Reset Confirmation dialog box, click Yes.
31 In the Please wait for system reset message box, click OK.
32 Refresh the browser periodically until the Login screen is displayed.
33 When the Login screen is displayed, enter your Username and Password and click Login.
On first entry, the default Username and Password are both POLYCOM.
The system is now fully configured and if there are no System Errors, the green RDY
LED on the CNTL module on the RMX’s front panel turns ON.
System restart may take up to five minutes.
To Next Page
Loading...
