Polycom 1500 - Page 46

Polycom RealPresence Collaboration Server (RMX)1500/2000/4000 Deployment Guide for Maximum Security Environments
1-40 Polycom, Inc.
27 Enter the required System Flags information in the dialog box.
Table 1-13 Signaling Network Service – System Flags
Flag Description / Default
Conference ID
Length (MCU)
The number of digits of the Conference
ID to be assigned by the MCU.
Range: 2-16 (Default: 5)
Note: Selecting 2 digits limits
the number of simultaneous
ongoing conferences to 99.
Minimum
Conference ID
Length (User)
The minimum number of digits that the
user must enter when manually
assigning a numeric ID to a conference.
Range: 2-16 (Default: 4)
Maximum
Conference ID
Length (User)
The maximum number of digits that the
user can enter when manually assigning
a Numeric ID to a conference.
Range: 2-16 (Default: 8)
Note: Selecting 2 digits limits
the number of simultaneous
ongoing conferences to 99.
MCU Display
Name
The MCU name is displayed on the endpoint’s screen.
Default name: Polycom RMX 1500, Polycom RMX 2000 or Polycom
RMX 4000.
Terminate
Conference when
Chairperson Exits
When Yes is selected (default), the conference ends when the
chairperson exits even if
there are other participants connected.
When No is selected, the conference automatically ends at the
predefined end time, or when all the participants have disconnected from
the conference.
Auto Extend
Conferences
When Yes is selected (default), allows conferences running on the RMX
to be automatically extended as long
as there are participants connected
and there are available resources.
The maximum extension time allowed by the MCU is 30 minutes.