Application > PGL Setup > Auto Uppercase
This parameter enables the printer to print text in all uppercase when using
the ALPHA command.
The printer will print text in upper and lowercase.
The printer will print text in uppercase only.
Application > PGL Setup > Slash 0
This parameter allows you to print the numeral “0” with or without the slash.
Zero is printed without a slash.
Zero is printed with a slash.
This option does not apply to OCR A or OCR B.
Application > PGL Setup > Select SFCC
You can specify which decimal code (1-255) will be used as the Special
Function Control Code (SFCC). The SFCC denotes that the following data is
a PGL command.
To Next Page
Loading...
