Application > PGL Setup > Var Form Type
This parameter allows you to manipulate forms created with the CREATE
command to include variable form length parameters.
When selected, no action is taken.
When selected, the form length ends at the longest
printed element. (Same as ~CREATE;filename;0).
When selected, the form length is set to match the
value in Media > Image > Label Length.
Application > PGL Setup > Skip Cmd Prefix
Stands for Skip Command Prefix. This parameter determines if the printer
will print any data before a PGL command is received.
The printer will print all data before a PGL command.
The printer ignores all data before a PGL command.
Application > PGL Setup > Ignore Text
Determines if text in NORMAL mode will be printed or ignored.
When disabled, text in normal mode will be printed.
Attributes to be printed depend on the PGL Normal
menu setting.
When enabled, any line of text (non-PGL commands)
in normal mode will be ignored.
To Next Page
Loading...
