Application > VGL Setup > Power-up ^F
Determines if VGL will be in free format mode at power-up. Free format
mode is when VGL ignores carriage returns, line feeds, and all characters
below 20 hex sent from the host.
VGL is not in free format mode.
VGL starts in free format mode and ignores all
characters below 20 hex.
Application > VGL Setup > Power-up ^PY
Determines if VGL will be in graphics mode at power-up.
VGL is not in graphics mode.
VGL starts in graphics mode at power-up.
Application > VGL Setup > LPI
Sets the LPI that will be used in VGL forms.
Application > VGL Setup > Btm Margin Ctl
Determines the page’s bottom margin.
A change in text length has no effect, and the bottom
margin setting in the LP+ Emulation menu will be used,
although the new text length value still shows in the
menu.
Text length changes the bottom margin value in the
LP+ Emulation submenu as follows: Bottom = physical
page length-top margin-text length.
To Next Page
Loading...
