Application > VGL Setup > Text Length
Text Length is the printable length on the page below the top margin.
Application > VGL Setup > Autoeject
Determines paper handling upon exiting the VGL Repeated Form and
Dynamic Form commands.
Holds the print position at the bottom of the form.
Issues a form feed after the last form is printed so all
pages will be physically printed.
Application > VGL Setup > Copy Count
Determines the number of identical copies of each physical page that will be
printed.
Application > VGL Setup > Host Form Length
Sets the printer page size when a form length command from the host
application is received.
Sets the printer label size equal to the Label Length set
in Media > Image > Label Length.
Sets the printer label size equal to Label Length from
the host form length command. (For more information,
refer to the VGL Programmer’s Reference Manual).
To Next Page
Loading...
