Application > VGL Setup > C39 Compatbl.
This menu makes the old method of decoding C39 alternative character set
compatible with the new.
Uses the better and more flexible way of decoding.
Matches the old method of decoding.
Application > VGL Setup > Ignore Chars
This menu is used for character filtering in the application stream.
Uses the better and more flexible way of decoding.
Character 1 will be filtered. Select the VGL menu
option “Ignore Ch#1” to specify character 1.
Character 2 will be filtered. Select the VGL menu
option “Ignore Ch#2” to specify character 2.
Character 1 and 2 will be filtered. Select the VGL menu
options “Ignore Ch#1” and “Ignore Ch#2” to specify
character values to be ignored.
Application > VGL Setup > Ignore Ch#1
Specifies character 1 for the character filtering option. Valid decimal values
are from 0 through 255.
Application > VGL Setup > Ignore Ch#2
Specifies character 2 for the character filtering option. Valid decimal values
are from 0 through 255.
To Next Page
Loading...
