Printronix T6000 - Page 140

140
Application > LP+ Setup > Host Command
This item allows you to select certain host commands to be ignored by the
printer.
Enable
All host commands accepted by printer.
Ignore All
All commands are ignored.
Ignore CPI
All CPI commands are ignored.
Ignore LPI
All LPI commands are ignored.
Factory Default
Enable
Application > LP+ Setup > Typeface
The font style or typeface to be used when printing text.
Letter Gothic
Letter Gothic is a non-proportional font where all of the
characters take up the same amount of space when
printed.
Courier
Courier is a non-proportional (monospaced) font where
all characters take up the same amount of space when
printed.
OCR-A
Optical character recognition font prints only at 10 cpi.
OCR-B
Optical character recognition font prints only at 10 cpi.
Factory Default
Letter Gothic
Application > LP+ Setup > Prop. Spacing
Each printed character is contained inside a character cell. The width of the
character cell includes the character and the space around the character.
Disable
Each character cell is printed with the same width.
Each column in the printed text will line up.
Enable
The width of each character cell varies with the width of
the character. For example, ‘i’ takes less space to print
than ‘m’. Using proportional fonts generally increases
the readability of printed documents, giving text a
typeset appearance.
Factory Default
Enable