Application > LP+ Setup > Bold
To determine if the text printed by the LP+ uses a heavy thickness.
Text is printed normally.
Text is printed with a heavy thickness.
Application > LP+ Setup > Italic Print
To determine if the text printed by the LP+ uses italics.
Text is printed normally.
Text is printed with a forward slant.
Text is printed with a backward slant.
Application > LP+ Setup > Slashed Zero
This parameter allows you to print the numeral ‘0’ with or without the slash.
Zero is printed without a slash.
Zero is printed with a slash.
This option does not apply to OCR-A or OCR-B.
To Next Page
Loading...
