Application > LP+ Setup > Top Margin
Defined in linespaces, starting from line zero at the top of the page and
incrementing from the top down.
Application > LP+ Setup > Bottom Margin
Defined in linespaces, starting from line zero at the bottom of the page and
incrementing from the bottom up.
Application > LP+ Setup > Print Char. Set
Selecting this executable menu by pressing the
ENTER key causes the
printer to print the currently selected character set.
Application > LP+ Setup > Reset Cmd CFG Ld
When the printer receives a host data stream reset command (ESC @ or
ESC[K) in addition to resetting printer variables, the selected configuration is
loaded.
The active emulation parameters are loaded when the
reset command is executed.
The power-up configuration is loaded when the reset
command is executed.
The currently selected configuration is loaded when
the reset command is executed.
The factory installed configuration is loaded when the
reset command is executed.
To Next Page
Loading...
