Printronix T6000 - Page 192

192
Network > WLAN Params > Min Xfer Rate
Allows you to set the minimum speed at which the Wireless Option will
accept a connection (in millions of bits per second). The options are
Auto-negotiate, 1Mb/sec, 2Mb/sec, 5.5Mb/sec, and 11Mb/sec.
Minimum
1Mb/sec
Maximum
11Mb/sec
Factory Default
Auto Negotiate
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > Power Mgmt
This allows you to set the power save mode and sleep time in milliseconds
(ms). If set to zero, power-save mode will be disabled.
Minimum
0 ms
Maximum
1000 ms
Factory Default
0 ms
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > Transmit Power
The transmit power as a percentage of full power.
Minimum
0%
Maximum
100%
Factory Default
100%
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.