Printronix T6000 - Page 193

193
Network > WLAN Params > Internat. Mode
When enabled, the Wireless option adapts to international frequency
requirements in Europe.
Disable
International Mode is disabled.
Enable
International Mode is enabled
Factory Default
Disable
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > Auth. Method
The wireless authentication scheme.
Open
This option allows all devices that have the
authentication algorithm number for open system to
navigate.
Shared
This option enables a four step authentication process
using secure or encrypted text by means of WEP.
Factory Default
Open
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > WEP Key 1 Format
Allows you to format WEP Key 1 in ASCII or hexadecimal code.
ASCII
Allows you to format WEP Key 1 in ASCII format.
Hexadecimal
Allows you to format WEP Key 1 in hexadecimal format.
Factory Default
Hexadecimal
Network > WLAN Params > WEP Key 1 Width
This is the encryption strength. The options are 40 bits and 128 bits: 40 bits
are weaker and 128 bits are stronger.
40 bits
Allows you to use 40 bit encryption for WEP Key 1.
128 bits
Allows you to use 128 bit encryption for WEP Key 1.
Factory Default
128 bits