Printronix T6000 - Page 194

194
Network > WLAN Params > WEP Key 1
The individual characters for WEP Key 1.
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > WEP Key 2 Format
Allows you to format WEP Key 2 in ASCII or hexadecimal code.
ASCII
Allows you to format WEP Key 2 in ASCII format.
Hexadecimal
Allows you to format WEP Key 2 in hexadecimal format.
Factory Default
Hexadecimal
Network > WLAN Params > WEP Key 2 Width
This is the encryption strength. The options are 40 bits and 128 bits: 40 bits
are weaker and 128 bits are stronger.
40 bits
Allows you to use 40 bit encryption for WEP Key 2.
128 bits
Allows you to use 128 bit encryption for WEP Key 2.
Factory Default
128 bits
Network > WLAN Params > WEP Key 2
The individual characters for WEP Key 2.
IMPORTANT
If changed, the printer reboots when it is placed
ONLINE.
Network > WLAN Params > WEP Key 3 Format
Allows you to format WEP Key 3 in ASCII or hexadecimal code.
ASCII
Allows you to format WEP Key 3 in ASCII format.
Hexadecimal
Allows you to format WEP Key 3 in hexadecimal format.
Factory Default
Hexadecimal