RADIOMETER ABL800 FLEX User Manual

3. Installation and setup ABL800 FLEX Operator's Manual
Quality control setup, Continued
Rilibäk Ranges
(continued)
To activate or deactivate the Rilibäk Rules, do the following.
Step Action
Press the On/Off button to activate/deactiviate the assigned Rilibäk
rules.
1.
To add a new Rilibäk rule, do the following:
Step Action
1.
Press the Add button to display the screen below:
2.
Select the desired parameter from the parameter list shown in the right
side of the screen.
3.
Press the Left arrow button until the first "Lower Limit" box is
highlighted and enter the desired lower limit.
4.
Highlight the next box and select "<" or "<=".
5.
Highlight the first "Upper Limit" box and select "<" or "<=".
6.
Highlight the next "Upper Limit" box and enter the desired upper
limit.
Continued on next page
3-46

RADIOMETER ABL800 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL800 FLEX
Category	Measuring Instruments
Language	English