RADIOMETER ABL800 FLEX User Manual

3. Installation and setup ABL800 FLEX Operator's Manual
Replacement setup, Continued
Solution Level
Forecast
(continued)
Step Action
3.
Select solution level forecasts for other solutions in the same manner.
4.
To reset all solution level forecasts to the default values: α = -1.00 and
β = 100.0, press the
− Set Default button.
Press Close to confirm the settings.
5.
AutoCheck
Replacement
Warning
This program allows you to select the time for a reminder to appear in the System
Messages in order to fill up the carousel.
To select time for the reminder, do the following:
Step Action
1.
Use the up/down arrow buttons to select one of the settings:
No, 1 hour, 2 hours, 4, 8, 12, 24, 48 hours.
Press Close to exit the program.
2.
3-54

RADIOMETER ABL800 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL800 FLEX
Category	Measuring Instruments
Language	English