ABL800 FLEX Operator's Manual 3. Installation and setup
Parameters and input setup, Continued
User-defined
Patient Data
Items
(continued)
To edit an item in the list, do the following:
Step Action
1.
Highlight an item in the list and press Edit.
2.
To change the name, press the keyboard icon on the keypad and type
in the new name of up to 20 characters. Confirm with Enter on the
keyboard.
3.
Select the data type with the up/down arrow buttons and press Select.
For "Text" entry proceed to step 8.
For "Numerical" entry proceed to step 4.
4.
Highlight "Unit". The keypad is now displayed. Press the keyboard
icon on the keypad and type in the new name of up to 20 characters.
Confirm with Enter.
5.
"Decimals" is now highlighted and the box with "None", "1", "2","3"
is displayed. Choose the number of decimals with the up/down arrow
keys and press Select to confirm.
6.
Highlight "Max. value". Type in the value and confirm with Enter
on
the keypad.
7.
"Min. value" is now highlighted. Type in the value and confirm with
Enter
on the keypad.
Continued on next page
3-59
To Next Page
Loading...
Need help?
General
