RADIOMETER ABL800 FLEX User Manual

ABL800 FLEX Operator's Manual 3. Installation and setup
Communications, Continued
QA Portal
(continued)
Step Action
2.
Touch and highlight the "Port" box. Type in port number, using the
keyboard.
3.
Press the check button in the "Enable communication with QA Portal"
box to activate connection.
The Icon in the "Connection status" box indicates the state of the QA
portal connection. "Enabled" indicates an established connection to
the QA portal.
The
icon in the information bar will indicate the established
connection as well.
Press Close to exit the screen.
4.
3-73

RADIOMETER ABL800 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL800 FLEX
Category	Measuring Instruments
Language	English