4. Sample measurements ABL800 FLEX Operator's Manual
Patient identification, Continued
Selecting
parameters after
a measurement
To change the parameter profile after a given measurement, do the following:
Step Action
Press Parameters on the Patient Identification screen.
1.
2.
To exclude a parameter, deactivate the relevant button.
To include a parameter, activate the relevant button.
Press Back to return to the Patient Identification screen and press
Result to display the changed result.
3.
Press Print to print out the changed patient report.
4.
NOTICE: The Selected Parameters screen displays all the parameters selected in
the Parameter Profile for a given measuring mode, depending on the analyzer
version.
4-20
To Next Page
Loading...
