ABL800 FLEX Operator's Manual 9. Data management
Patient Results Log, Continued
Button functions
The following functions are available by activating a button:
Button Function
Result
Displays the highlighted patient report – see chapter 4: Sample
measurements for the detailed information.
Filter
Sets conditions for finding a patient report or for trend function –
see below.
Close
Returns to the Ready screen.
Trend and
Print
Are inactive until the filter criteria are chosen and applied.
Filter function
To set the filter criteria in order to find a patient report or to select a number of
patient reports, do the following:
Step Action
1.
Set the start date by using the 1-day, 7-day, 14-day or 30-day icons in
the “Criteria” box. Or type in the date, using the keypad and
confirming the entry with Enter.
2.
Change if necessary the end date by highlighting it and typing date
other than the current date. Confirm with Enter.
3.
Use the arrow buttons to highlight the desired search criteria. Press
More to display more filter criteria.
Note that the right side of the screen changes to show choices for the
highlighted search criterion.
4.
Select the desired choice and confirm each entry with Enter. Or use
the keyboard to enter the desired data and confirm each entry with
Enter.
5.
When all the criteria have been selected, press Apply to start the
search.
Continued on next page
9-5
To Next Page
Loading...
Need help?
General
