9. Data management ABL800 FLEX Operator's Manual
Patient Results Log, Continued
Trend function
To make a parameter trend for the selected patient reports, do the following:
Step Action
1.
Set up search criteria as described under Filter function and apply
them. The screen of the selected patient reports will be displayed.
The Trend and Print buttons are now active.
2.
Press Trend to select the parameter(s).
3.
Press View Trend to display the trend of the selected parameter(s) for
the selected patient reports.
4.
To view the selected filter criteria, press View Filter.
The criteria can only be viewed, not changed.
To apply new criteria, repeat the Filter function procedure described
in this topic and the procedure for the Trend function.
5.
Press Back to return to the previous screen.
9-6
To Next Page
Loading...
Need help?
General
