9. Data management ABL800 FLEX Operator's Manual
Calibration Log, Continued
Viewing a
calibration
result
To view a calibration result, do the following:
Step Action
1.
Highlight the desired calibration.
2.
Press Result – see chapter 6 for details about calibration results.
Filter function
This function allows you to find a calibration or to select a number of calibrations.
To set the filter criteria, do the following:
Step Action
1.
Press the Filter button on the Calibration Log screen.
2.
Set the start date by using the 1-day, 7-day, 14-day or 30-day icons.
Or type in the date using the keypad and confirm with Enter.
Change if necessary the end date by highlighting it and typing the date
other than the current date. Confirm with Enter or Select.
3.
Select the desired calibration type and status, using the relevant arrow
buttons.
Confirm each entry with Enter or Select.
4.
When the criteria have been selected, press Apply to start the filter.
Continued on next page
9-18
To Next Page
Loading...
Need help?
General
