RADIOMETER ABL800 FLEX User Manual

ABL800 FLEX Operator's Manual 15. Radiometer settings
15-3
Radiometer default settings, Continued
Default settings for Access Profiles are as follows:
A B C D E F G H I J
User X X X (X) X X
Supervisor X X X X X X X X X
Manager X X X X X X X X X
Service techn. X X X X X X X X X X
Guest X (X)
Custom 1 (X)
Custom 2 (X)
Custom 3 (X)
Remote
operator
X X X X X X X X X
A = Perform measurement
B = Perform calibration
C = Perform replacements
D = Perform Disk Functions
E = View Data Logs
F = Edit data in logs
G = Enter Setup Programs
H = Enter Service Programs
I = Start AutoCheck
J = Approve results
Columns D, E, G and H are controlled via the Menu and Button Configuration
screen settings, not via the check buttons on the Access Profiles screen.
(X) means restricted access to data logs:
 User can view the logs, but there is no access to the archived data logs.
 Guest and Custom can view Patient Results Log and Quality Control Log.
Continued on next page

RADIOMETER ABL800 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL800 FLEX
Category	Measuring Instruments
Language	English