RADIOMETER ABL800 FLEX User Manual

15. Radiometer settings ABL800 FLEX Operator's Manual
15-4
Radiometer default settings, Continued
The following default measuring modes are available:
Analyzer Modes Default button
ABL837/27
/17
Syringe
Syringe – S250 L; Syringe – S85 µL;
Syringe – Pleura pH
Ampoule – QC; Expired air
Capillary
Capillary – C125 L; Capillary – C55 µL;
Capillary – C35 L MET; Capillary – C35 µL
OXI
ABL835/25
/15
Syringe:
Syringe – S195 L; Syringe – S95 L;
Syringe – Pleura pH
Ampoule-QC
Capillary:
Capillary – FLEXMODE; Capillary – C95 L;
Capillary – C55 L pH+BG+OXI;
Capillary – C35 L MET
Capillary – C35 L OXI
ABL830/20
/10/10 BG
only
Syringe:
Capillary:
Syringe – S85 L; Syringe – Pleura pH
Ampoule-QC
Capillary – FLEXMODE; Capillary – C55 L
Capillary – C35 L OXI
ABL805 Syringe:
Syringe – S165 L; Syringe – S95 L;
Syringe – Pleura pH
Ampoule-QC
Capillary:
Capillary – FLEXMODE; Capillary – C95 L;
Capillary – C55 L pH+BG;
Capillary – C35 L MET
ABL800* N/A N/A
* Not available at the time of the release.
 All user-defined modes and Other Fluids mode are deleted. All modes are set to
Radiometer default layout.
 Reference ranges and critical limits are deleted.
 Parameter profile: All parameters are selected.
 Dynamic Parameters: Off.
 Sample Pre-registration settings:
- Interpret barcode input as: Sampler ID
- Confirm pre-registered data : On.
- Included fields: All fields On.
 Sample Logistics Setup settings:
- Batch mode: Off
- Sample age: On (30 min for all parameters)
- Primary patient ID field in "FLEXQ" box: Patient Last Name.
Continued on next page
Analysis Setup
defaults

RADIOMETER ABL800 FLEX Specifications

General

Brand	RADIOMETER
Model	ABL800 FLEX
Category	Measuring Instruments
Language	English