ABL800 FLEX Operator's Manual 15. Radiometer settings
15-13
Radiometer default settings, Continued
Default settings for Printer Setup are as follows:
Item Default setting
Installed printers Internal Printer
(added printers
are not deleted)
Select printer dialogue Off
Default settings for Automatic Backup are as follows:
Item Default setting
Auto Backup Off
Default settings for Automatic Archiving are as follows:
Item Default setting
Patient report log On
Calibration log On
Quality control log On
Activity log On
Store archives on the analyzer On
Default settings for Communication Setup are as follows:
Item Default setting
RADIANCE Connection Off
LIS/HIS Connection None
QA Portal Off
Automatic Data Request "When entering sampler
ID" – on
Automatic Data
Transmission
Patient results, Calibration
results, QC results, Activity
log messages
Patient Lookup Setup Local database
Remote Support Enable remote access
Continued on next page
General Setup
defaults
(continued)
To Next Page
Loading...
