3. Installation and setup ABL800 FLEX Operator's Manual
Analyzer security, Continued
Operators and
Passwords
(continued)
To remove an operator from the list, use the up/down arrow buttons in the
"Operator" box to highlight the operator and press Remove Operator.
NOTICE: If the Centralized User Management option is enabled in the General
Security screen you cannot add, remove or edit the operators, but only view the
access profiles of the individual operators.
Access Profiles
This program allows you to define the permitted actions, the available menu items
and button shortcuts of an access profile.
To enter this program, press Menu – Utilities – Setup – Analyzer Security –
Access Profiles.
To define the permitted actions of an access profile, select the desired profile in the
"Profile names" box and activate the desired check buttons in the "Permitted
actions" box.
To deactivate an action, press the check buttons once again.
Continued on next page
3-10
To Next Page
Loading...
