ABL800 FLEX Operator's Manual 3. Installation and setup
Analyzer security, Continued
Operators and
Passwords
(continued)
To add an operator to the list, do the following:
Step Action
1.
Press the Add Operator button to display the Add New Operator
screen.
2.
Type the name of the operator or operator category in the "Operator
ID" box, using the screen keyboard.
3.
Enter or scan the password: in the "Password" box.
The password must be at least four characters long, and not more than
32.
4.
Re-enter or re-scan the password in the "Confirm" box.
5.
Enter or scan the logon barcode in the "Logon – barcode:" box
The logon barcode must be at least four characters long. The logon
barcode and the password can be identical.
6.
Re-enter or re-scan the logon barcode in the "Confirm" box.
7.
Press Back.
If the password is not accepted, the Add New Operator screen
remains open and a message, telling you what was wrong, appears.
If the password is accepted, the Operators and Passwords screen is
displayed.
8.
In the Operators and Passwords screen, select the desired access
profile of the new operator.
Continued on next page
3-9
To Next Page
Loading...
Need help?
General
