3. Installation and setup ABL800 FLEX Operator's Manual
Analyzer security, Continued
Operators and
Passwords
This program allows you to add, edit or remove operators and to assign an access
profile to each operator.
NOTICE: If the Centralized User Management option is enabled in the General
Security screen, you cannot add, remove or edit the operators, but only view the
access profiles of the individual operators.
To enter the Operators and Passwords program, press Menu – Utilities – Setup –
Analyzer Security – Operators and Passwords.
Shows the list of
actual operators
Shows the list of
available operator
profiles
When the analyzer is taken into use, the following default operators are available:
Operator Has access to…
Manager All menu items and programs (not service programs). It is
recommended to remove this operator with the standard
password: 123456, and enter the actual users with their
profiles and passwords.
Radiometer All menu items and programs (user and service) on the
analyzer. Note that "Radiometer" cannot be removed from
the operator list.
Remote operator Only if the Remote Support option key is installed.
Continued on next page
3-8
To Next Page
Loading...
Need help?
General
