ABL800 FLEX Operator's Manual 3. Installation and setup
Patient reports, Continued
Entering default
values
To enter default values for patient identification items, do the following:
Step Action
1.
Use the arrow buttons on the right to highlight the desired item in the
"Selected items" box.
2.
Set the default:
Changes to
•
If the item has a value, press Keyboard, enter the value and press
Enter on the keyboard to confirm.
•
If the item has a list of options, press List, highlight the option
using the arrow buttons and press Enter
to confirm.
3.
Set or change other default values in the similar manner.
4.
Press Back to exit and confirm changes.
NOTICES:
• It is not possible to set default values for all items.
• The values can be changed on a result-by-result basis on the Patient
Identification screen.
• An item placed in the Selected items list does not appear in the Available items
list.
• To use the Patient Lookup function, Department (Pat.) should be selected for the
Patient Identification screen.
• To use the Request function, Accession number, Sampler ID and/or Patient ID
should be selected for the Patient Identification screen.
Continued on next page
3-29
To Next Page
Loading...
Need help?
General
