Accessories
82 Rev. B4 Feb 2015 CS210
10.3 Serial RS485 / RJ45 Ethernet Converter
The serial RS485 / RJ45 Ethernet Converter (XXXSYSCS210CON) is a dedicated device server for
connecting up to four RS485 devices to a TCP/IP network.
The serial RS485 / RJ45 Ethernet Converter must be installed in case of having either one or all
accessories such as Fan Control, Burning Zone Monitoring, Shadow Monitoring, or Live Ring
Migration. The converter must be mounted in the system connection box in the field. For both CS211
and CS212 only one converter is required.
Figure 80: Serial RS485/ RJ45 Ethernet Converter
10.3.1 Technical Data
Ethernet Communications
Speed 100 Mbit/s
Ports 2x
Port connector RJ45
Protection built-in 1.5 kV magnetic isolation
IP-address 192.168.42.10 (default)
RS485 Communications
Ports 4x
Port connector DB9 male
Protection built-in 15 kV ESD for all signals
Software
Driver support Windows 2000/XP/Vista/Win 7
Utility software Serial Device Server Configuration Utility (on the Support
DVD)
for installing Virtual COM ports
Mechanics
Dimensions (W x H x D) 55 x 140 x 95 mm (2.1 x 5.5 x 3.7 in)
Mounting DIN-rail
Power
Power input 12 to 48 VDC, redundant dual inputs
Power connector terminal block
Power consumption 4 W
To Next Page
Loading...
