RayTek CS210 - PC Requirements

Pre-Installation
CS210 Rev. B4 Feb 2015 17
4.6 PC Requirements
Minimum Hardware requirement for CS211 and CS212:
− Processor: Intel i5 quad core series CPU or comparable
− 8 GB RAM system memory
− 1280 x 1024 pixel graphic card and monitor
(for displaying one scanner with 1024 pixel per line)
2560 x 1600 pixel graphic card and monitor
(for displaying two scanners with 2048 pixel per line)
− OpenGL 2.1 graphics adapter (when using the 3D Real Time View)
− 50 GB hard disk
− DVD drive
− Ethernet, TCP/IP protocol, 100 Mbit/s
Minimum Software requirement:
− Windows
®
XP or Windows 7
3
with latest Service Pack
It is strongly recommended to run the CS
software exclusively on the PC! Other
applications could affect function and performance.
For the CS system it is necessary to disable Windows' default power management
settings in order to avoid that the computer goes to sleep automatically.
Make sure that a possible firewall does not block the following ports:
TCP/UDP Port
Server
Client
Remark
16500
CS Readscan
CS Deneb
1433
CS SQL database
CS Config, CS Readscan
25
CS Mail (SMTP)
CS Readscan
default
2727
Linescanner Communication
CS Readscan
default
5048, 5058
Serial RS485 / RJ45 Ethernet Converter
CS Readscan
as accessory only
23
Telnet
for service only
3
Windows Vista should work but it is not guaranteed.