EasyManuals Logo

Ricoh 2015 User Manual

Ricoh 2015
814 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #738 background imageLoading...
Page #738 background image
Appendix
116
9
IEEE 802.11b TX Rate <Transfer Speed> The IEEE 802.11b transmitting speed (set
speed) is displayed.
(Example: current Tx Rate is 11 Mbps.)
IEEE 802.11b Tx Rate 11 Mbps
Transmission speeds vary depending on sig-
nal quality. Displayed values may differ from
actual transmission speed.
inetd start. An inetd has started.
<interface> started with IP: <IP address> <IP address> has been set for <Interface> and
<Interface> started.
<Interface>: Subnet overlap. Subnet from Netmask and the IP address you
tried to set for <Interface> overlap the subnet
of another interface.
Set Subnet so it does not overlap with another
interface.
IPP cancel-job: permission denied. The printer could not authenticate the name of
the user attempting to cancel a job.
ipp disable. Printing with ipp is disabled.
ipp enable. Printing with ipp is enabled.
IPP job canceled. jobid=%d. The spooled job has been canceled due to er-
ror or user request.
job canceled. jobid=%d. The spooled job has been canceled due to er-
ror or user request.
LeaseTime=<lease time>(sec), RenewTime=
<renew time>(sec).
The resource lease time received from the
DHCP server is <lease time> in seconds. The
renewal time is also <renew time> in seconds.
Login to fileserver <file server name>
(<IPX|IP>,<NDS|BINDERY>)
(In print server mode) Logged on to the file
server with NDS or BINDERY mode.
multid start. Data transmission service for multiprotocols
has started.
Name registration failed. name=<NetBIOS
name>
The printer could not register the name of
NetBIOS.
Name registration success in Broadcast
name=<NetBIOS name>
The NetBIOS name was successfully regis-
tered from a broadcast.
Name registration success. WINS Server=
<WINS Server Address> NetBIOS
Name=<NetBIOS name>
The NetBIOS name was successfully regis-
tered to the WINS server.
nbstart start.(NetBEUI) The server for setting the NetBEUI protocol
stack has started.
nbtd start. nbtd (NetBIOS over TCP/IP Daemon) has
started. (Available only in DHCP mode)
Message Causes and solutions

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ricoh 2015 and is the answer not in the manual?

Ricoh 2015 Specifications

General IconGeneral
BrandRicoh
Model2015
CategoryAll in One Printer
LanguageEnglish

Related product manuals