UNIX Configuration
16
1
Note
❒ You can use wild cards (“*” or “?”) for the file name with the “mput” com-
mand.
The following procedure shows an example of how to print a file using the “ftp”
command.
A
AA
A
Start ftp using the IP address or host name of the printer.
% ftp IP_address
B
BB
B
Enter the user name. Leave the password field blank and press the {
{{
{RE-
TURN}
}}
} ({
{{
{ENTER}
}}
}) key.
Name:
Password:
C
CC
C
Set the file transfer mode to binary.
ftp> bin
Note
❒ If the file transfer mode is not set to binary, the image may not be printed
correctly.
D
DD
D
Print the file.
Note
❒ For example, to print the file named “file1”:
ftp> put file1
❒ For example, to print the two files named “file1” and “file2”:
ftp> mput file1 file2
E
EE
E
Exit ftp.
ftp> bye
To Next Page
Loading...
