Service
Tables
USING SERVICE PROGRAM MODES
SM 5-5 B039/B040/B043
1
Mode Number/Name Function/[Setting]
Feed Clutch Boost
1 By-pass tray Adjusts the amount of extra push that the feed clutch
gives to the paper after the skew has been corrected at
registration.
[0 ~ 10 / 6 / 1 mm/step]
This feature helps the registration roller feed certain types
of paper (such as thick paper). Increase the value if thick
paper is jamming after feeding from the registration roller.
903*
2 2nd, 3rd, 4th tray
[0 ~ 10 / 3 / 1 mm/step]
Paper Tray Adjustment
1 1st optional
908*
2 2nd optional
Adjusts the reverse time for the upper and lower paper lift
motors.
[–2 ~ +2 / 0 / 1/step]
☛
Detailed Descriptions – Optional Paper Tray Unit
To Next Page
Loading...
