STAMP SOLENOID AND ORIGINAL EXIT SENSOR
B379 7-28 SM
3.11 STAMP SOLENOID AND ORIGINAL EXIT SENSOR
1. Front cover, Rear cover, Original exit table (☛ 3.1)
2. Open the exit guide plate [A]. Next, detach the unit by inserting a screwdriver or
other tool into one of the small openings [B] on either side of the guide plate
holder and pushing firmly.
3. [C] Stamp solenoid (! x 1 " x 1)
4. [D] Original exit sensor (" x 1)
B379R509.WMF
B379R203.WMF
[A]
[B]
[C]
[D]
To Next Page
Loading...
