Ricoh B039 - Operation Dump List

Fat Unit B404
OPERATION DUMP LIST
SM 6-1 B404
6. DETAILED SECTION DESCRIPTIONS
6.1 OPERATION DUMP LIST
The dump list contains a record of the actual operations performed by the operator
(including keys that were pressed) as well as when these operations were
performed. Refer to the sample below.
APIP indicates an operator action, which is subdivided into either KEY CODE (key
operation) or STATUS (non-key operation). The operation itself is then described in
the column to the far right. If the Start key was pressed, the following line starts
with ‘TIME’, and the day and time of the operation are then shown in the middle
and far right columns.
This feature was developed in order to provide an accurate record (evidence) of
the actual operations performed by the user, which may be used to clear up cases
where the machine had apparently performed a wrong operation even though the
correct keys were pressed.
This list can be printed out with fax service mode 15: History (☛ 5. SERVICE
TABLES).
Code Number and
Meaning
Message
Number
* * * OPERATION MAILBOX(R) DUMP (Date and Time) * * *
MSG CLASS CODE
--------------------------------------------------------------------
0001 01:APIP 02:STATUS 0D00:LowPower Mode Out
0002 01:APIP 02:STATUS 0004:Rel Req
0003 01:APIP 02:STATUS 0004:Own Req
0005 01:APIP 01:KEY CODE 0022:2
0007 01:APIP 01:KEY CODE 0023:3
0006 01:APIP 01:KEY CODE 0025:5
0008 01:APIP 01:KEY CODE 0001:Start
0004 01:APIP 01:KEY CODE 0055:Onhook
0009 7E:TIME XX:day XXXX:hour:min
: : : :
: : :
: : :
: : :
: : :
: : :
P.#
Class
: : :
: : :
: : :
: : : :
: : : :
: : : :
B404D500.WMF