Ricoh B039 - Page 445

BIT SWITCHES
B404 5-28 SM
Relationship between available paper sizes and printer width used in the
setup protocol
Available Paper Size Printer width used in the Protocol (NSF/DIS)
A4 or 8.5 x 11” 297 mm width
B5 256 mm width
A5 or 8.5 x 5.5” 216 mm width
No paper available (Paper end) 216 mm width
Plotter Switch 02
No FUNCTION COMMENTS
0 1st paper feed station usage for
fax printing
0: Enabled
1: Disabled
1
2nd paper feed station usage
for fax printing
0: Enabled
1: Disabled
2
3rd paper feed station usage
for fax printing
0: Enabled
1: Disabled
0: The paper feed station can be used to print fax
messages and reports.
1: The specified paper feed station will not be used
for printing fax messages and reports.
Note: Do not disable usage for the paper feed
station which has been specified by User Parameter
Switch 0F (15), or which is used for the Specified
Cassette Selection feature.
3
4th paper feed station usage
for fax printing
0: Enabled
1: Disabled
4-7 Not used Do not change the settings.
Plotter Switch 03
No FUNCTION COMMENTS
0 Length reduction of received
data
0: Disabled
1: Enabled
0: Incoming pages are printed without length
reduction.
(Page separation threshold: Plotter Switch 03, bits 4
to 7)
1: Incoming page length is reduced when printing.
(Maximum reducible length: Plotter Switch 04, bits 0
to 4)
1-3 Not used Do not change the settings.