Ricoh B039 - Page 457

BIT SWITCHES
B404 5-40 SM
G3 Switch 06
No FUNCTION COMMENTS
0
to
3
Initial Rx modem rate
Bit3210 Setting (bps)
0001 2.4 k
0010 4.8 k
0011 7.2 k
0100 9.6 k
0101 12.0 k
0110 14.4 k
0111 16.8 k
1000 19.2 k
1001 21.6 k
1010 24.0 k
1011 26.4 k
1100 28.8 k
1101 31.2 k
1110 33.6 k
Other settings - Not used
These bits set the initial starting modem rate for
reception.
Use a lower setting if high speeds pose problems
during reception.
If a modem rate of 14.4 kbps or slower is selected,
V.8 protocol should be disabled manually.
Cross reference
V.8 protocol on/off - G3 switch 03, bit 2
4
to
7
Modem types available for
reception
Bit7654 Setting
0001 V.27ter
0010 V.27ter, V.29
0011 V.27ter, V.29
V.33
0100 V.27ter, V.29,
V.17/V.33
0101 V.27ter, V.29,
V.17/V33,
V.34
Other settings - Not used
The setting of these bits is used to inform the
transmitting terminal of the available modem type for
the machine in receive mode.
If V.34 is not selected, V.8 protocol must be
disabled manually.
Cross reference
V.8 protocol on/off - G3 switch 03, bit 2