5.System Maintenance
159
Scanner Service Setting
Sets the monochrome compression type for
scanning.
[MH (Default)/ MR/ MMR]
Adjusts the ADF main-scan registration.
[-1.0 to 1.5 / 0 / 0.1mm/step]
Adjusts the ADF sub-scan registration.
[-1.0 to 1.5 / 0 / 0.1mm/step]
Adjusts the Flatbed main-scan registration.
[-1.0 to 1.5 / 0 / 0.1mm/step]
Adjusts the Flatbed sub-scan registration.
[-1.0 to 1.5 / 0 / 0.1mm/step]
Adjusts the ADF main-scan registration on the
back.
[-1.0 to 1.5 / 0 / 0.1mm/step]
Adjusts the ADF sub-scan registration on the
back.
[-1.0 to 1.5 / 0 / 0.1mm/step]
Adjusts the ADF sub-scan magnification.
[-0.9 to 0.9 / 0 / 0.1%/step]
Adjusts the Flatbed sub-scan magnification.
[-0.9 to 0.9 / 0 / 0.1%/step]
Adjusts the ADF difference between front and
back for red.
[-30 to 30 / 0 / 1/step]
Backside CIS- Green-
White
Adjusts the ADF difference between front and
back for green.
[-30 to 30 / 0 / 1/step]
Adjusts the ADF difference between front and
back for blue.
[-30 to 30 / 0 / 1/step]
Adjusts the ADF difference between front and
back for gray.
[-30 to 30 / 0 / 1/step]