Ricoh P C301W - 7 Detailed Descriptions; Guidance for those Who Are Familiar with Predecessor Products

7.Detailed Descriptions
249
7. Detailed Descriptions
Guidance for Those Who are Familiar with Predecessor
Products
Function
Previous C260 series
New (This model)
Printer model
MF model
Printer
model
MF model
SP
C260DNw/C262DN
w
SP
C260SFNw/C262SF
Nz
P
C300W/301
W
M
350FWB/250F
W
Operation panel
Two–line LCD
4.3 inch touch panel
Four–line
LCD
4.3 inch touch
panel
Printing speed
20 ppm
25 ppm
AIO
Common
Common
Fusin
g
Fusing
method
Hot roller method
Quick Start-up method (Fusing
sleeve belt method)
Fusing
motor
Transport motor controls paper transport
line and fusing unit.
Fusing motor has been added,
so paper transport line and
fusing unit are controlled
separately.
AC current
detection
circuit
-
AC detection board installed to
control fusing suited for input
voltage.
PSU cooling
fan
-
A PSU cooling fan has been
provided to cope with the heat
caused by the additional 24V
load due to modifications in the
fusing method.
Fusing
thermopile,
NC sensor,
anti-
condensatio
n fan
-
• Thermopile and NC
sensor provided to
monitor the temperature of
the fusing sleeve belt.
• Thermistors provided to
monitor the temperature of
the pressure roller.
• Anti-condensation fan
provided to prevent