4.Setting for PaaS (Only for CHN)
23
Technical Tips
• Only execute the “Factory Default” when it is necessary. If the machine is reset by the Factory
Default operation, the PaaS settings will be reset and deleted.
In the event that the Factory Default is executed, set the PaaS again through the procedure in
"Overwrite Registration on Server".
• Unless PaaS registration is completed by the PaaS platform server, and the message “Operation
Successful” appears on the Web Image Monitor, Print/Fax/Scan/Copy can only use up to 100
pages, and if over 100 pages are used, the applications will become unusable.
However, if just one job containing more than 100 pages is performed, the job will be completed.
• Never change the PaaS Validity Setting to inactive without unregistering PaaS. For the
unregistration process, refer to "Unregistering PaaS".
To Previous Page
Loading...
